Product Grinder
Grinding Applications
Parts and Service
|
These high speed Product Grinders use a high-inertia design, sharp cutting knifes, and solid rotating cylinders to grind various industrial raw materials. We offer a large selection of size reduction equipment with infeed systems, qualifying screens, and configurable discharge designs. The 13 and 14 Series Grinders meet the majority of customer needs
and are available in several models. Options include qualifying
screens, water cooling, infeed and outfeed systems, and programmable
control panels. Infeed openings range from 10" x 11" to 20" x 54".
Motors are offered from 25 HP to 500 HP. The 15 Series Grinders are used where tramp, foreign material
may present a problem. With breakaway steel struts, any foreign
material entering the unit will cause a hinged door to open, allowing
the material to escape, saving costly rebuilds. The main rotor bodies are machined from cast steel or stainless
steel depending on the application. (The stainless castings are
used primarily in munitions
|
|
Jordan Reduction Solutions stands ready to service your Mitts & Merrill equipment with the most extensive network of sales, service, and replacement parts in the industry. |
|
Hog Mill and Hog GrinderFor years in the grinding industry, these machines have also been known as Hog Grinders or Hog Mills due to their use in the food processing industry. |
|
grinding
and the food industry.) Capacities can range from 200 lbs to 20,000
lbs per hour depending on the material being reduced.
O.E.M Successors to Mitts and Merrill material processing and
size reduction equipment.
How it works |
|
 |
|
ApplicationsThese grinders are suitable for grinding plastic, rubber, wood, PVC, vinyl, wire, and just about anything that will fit into the infeed hopper. We have several custom application grinders specially designed for certain industries, such as the carpet, textile, and fabric industry. In this application, carpet rolls, loose carpet and other textiles are fed directly into the grinder by a variable speed horizontal conveyor. |
 |
Sizing ScreensDesigned for easy and convenient access, the sizing screens can be quickly removed to allow for clean-out between material changes or to change screen sizes. |
 |
Grinder Specifications |
|||||||
| Model (with screen*) |
BDHS |
13CSD |
13CSE |
14CSE |
14CSF |
14CSG |
14CSH |
| Overall Height | 28" | 39 1/2" | 39 1/2" | 44" | 44" | 44" | 44" |
| Overall Width | 32" | 42" | 42" | 53" | 53" | 53" | 53" |
| Overall Length | 38" | 50" | 66" | 66" | 75" | 84" | 95" |
| Feed/Cutting Chamber | 10"x11" | 15"x18" | 15"x27" | 20"x27" | 20"x36" | 20"x45" | 20"x54" |
| Discharge Opening | 13.5"x20.5" | 22"x25" | 25"x31" | 30"x31" | 30"x40" | 30"x49" | 30"x58" |
| Shaft Diameter | 2 15/16" | 4 7/16" | 4 7/16" | 4 15/16" | 4 15/16" | 6 7/8" | 6 7/8" |
| Shaft Bearing Size | 2 7/16" | 2 15/16" | 2 15/16" | 3 15/16" | 3 15/16" | 3 15/16" | 4 7/16" |
| Number of Knives | 12 | 12 | 18 | 18 | 24 | 30 | 36 |
| Rotor/Knife Swing Diameter | 20 5/8" | 26 5/8" | 26 5/8" | 30 5/8" | 30 5/8" | 30 5/8" | 30 5/8" |
| Shaft RPM (Max) | 1,800 | 1,200 | 1,200 | 1,200 | 1,200 | 1,200 | 1,200 |
| Motor HP (Max) | 50 | 200 | 200 | 250 | 250 | 250 | 250 |
| Weight (lbs) | 2,200 | 4,500 | 5,535 | 10,000 | 12,000 | 19,300 | 23,100 |
| Capacity (lbs/hr) | 1,800 | 4,500 | 6,750 | 6,750 | 9,000 | 11,250 | 13,500 |
| Capacities shown are with 1" diameter holes and are an average for hardwood. Capacities will vary with other materials. |
| The above units are bottom discharge units. Rear discharge units are also available. |
| *Also available without screens. |
|
Pictures on this page are illustrative only. Specifications are subject to change without notice to accommodate improvements to the equipment. Certified in compliance with ANSI Regulations and all OSHA standards, and certified under WASTEC's Stationary Compactor Certification Program. Products must be used with safe practice and in accordance with said regulations and standards. |