Non-ferrous Metals

G1012 Open Rotor Granulator

JRS G1012 Industrial Granulator The G1012 is perhaps one of the more popular small scale industrial granulators.   Manufactured on the same design as our larger units, the G1012 is capable of producing low to medium capacities of smaller feed stock.  Offered in a 10 or 15 horse power drive arrangement, the G1012 is an […]

Read More

G1420 Open Rotor Granulator

JRS G1420 Industrial Granulator Our mid range, open rotor style granulator, the G1420 comes with a standard 20 horse power drive with a 25 horse power drive option.  The 14” x 20” throat allows for feeding of larger materials via a conveyor or shielded hand feed design.

Read More

G1635 Open Rotor Granulator

JRS G1635 Industrial Granulator Standard open rotor style granulators with an ample 16″ x 35″ long throat. The 1635 was designed to handle much higher production capacities than its smaller counterparts in both automatic and hand feed options. Standard with a 50 horse power drive, the G1635 also has the option of 75 or 100 […]

Read More

G1825 Heavy Duty Granulator

JRS G1825 Industrial Granulator The G1825 is the smallest in our line of staggered knife open rotor granulators.   The unique “slicing” action of both units migrate materials from the outside of the cutting chamber inward to assure maximum cutting efficiency.

Read More

G1840 Heavy Duty Granulator

JRS G1840 Industrial Granulator G1840-CR Close Rotor Identical to the G1825, the G1840 operates at a standard horse power rating of 125, yielding higher capacities and accommodating greater in-feeds. G1840-OR Open Rotor 40” long version of the G1825 to accommodate larger capacities of material feeds.

Read More

G1842 Open Rotor Granulator

JRS G1842 Industrial Granulator Standard open rotor style granulator with a full 18″ x 42″ throat for larger infeed and increased production. The 1842 was designed to handle much higher production capacities than its smaller counterparts. Standard with a 75 horse power drive, the G1842 also has the option of 100 or 125 horse power […]

Read More

G2260-OR Heavy Duty Granulator

JRS G2260 Industrial Granulator Our largest Heavy Duty Granulator. The G2260 is designed for high capacity loads with standard horse power at 150. Optional horse power is available upon request. The G2260 is only available in open rotor design.

Read More

MS-1714 Dual Shaft – 15 HP Shredder

JRS MS-1714 Perfect where shredding needs are small yet the need for an industrial grade shredder exists.  The MS-1714 industrial shredder is the ideal Plastic Shredder for small plastic parts that simply need destroying or need to be prepared for recycling.  It is as well ideal for the shredding of smaller components such as cosmetics, […]

Read More

MS-2817 Dual Shaft – 25 HP Shredder

JRS MS-2817 Tough, rugged and yet, not too big. The MS-2817 can handle a variety of material from plastic to non ferrous metals. Ideal where shredding needs are demanding and budgets are tight; one of the most economical shredders in its class and size. Dual Shaft Shredders For general purposes, dual shaft shredders are typically […]

Read More

MS-4220 Dual Shaft – 50 HP Shredder

JRS MS-4220 Perhaps our most popular mid range shredder. The MS-4220 Industrial Shredder is a work horse and has the power to handle your tougher jobs while maintaining a size, power requirement and cost that can fit into demanding budgets.  With a variety of options, the MS-4220 can be used to shred paper, plastic, passenger tires, […]

Read More